Testing Lab Equipments
Calibration Testing Equipments
Calibration Bath and Furnace (-30°C to 1000°C)- Dead Weight Tester
- Electronic Torque Tester (0-10 Nm)
- Electro Servo Hydraulic UTM (500 KN/2000KN)
- Granite Surface Plate
- HV Probe
- LCR Meter
- Master Sensor (R, K N Type)
- Orifice Calibrator
- Pressure Meter (Differential)
- Primary Flow Calibrator
- Proving Rings (25, 100, 500, 2000 KN)
- Relative Humidity Generator Calibration Chamber
- RTD Sensor
- Slip Gauges
- Sound Calibrator (94 dB at 1 KHz)
- Standard Weights up to 20 kg Universal Length Machine (ULM)
- Universal Calibrator (WAVETEK)
- UV-Vis Calibration Filter
- Vibration Meter
Chemical Testing Equpments (Food, Agro Products, Water, etc)
- AAS with Graphite Furnace
- Abbe Refractometer Digital
- BOD Incubator
- COD Digestion Apparatus
- Flash Point Testing Apparatus
- FTIR Spectrophotometer (Perkin Elmer)
- GC-MS/MS Triple Quad (Agilent-GC 7890A and MS 7000)
- GC-MSD (Agilent-GC 7820 AGC and MSD 5977E)
- GC-MS/MS (Thermo Finnigan, PolarisQ)
- GC with FID and TCD (East & West 4000 A, EGC -4002A)
- GC with FID and TCD (Nucon 5700)
- HPLC Binary-1200 Series,1200 Infinite series(Agilent)
- HPLC Binary with Fluorescence Detector(RF 10 AXL,Shimadzu)
-
HPLC Isocratic with UV-VIS detector(LC-10 ATVPS,
Shimadzu)
-
ICP-MS (Agilent Technologies, 7700 Series,>G5700
A)
- ICP-OES (Varian Vista-MPX)
- Interfacial Tension Meter
- KF Titrator (Systronics)
- LCMSMS (Agilent Technologies)
- OES ARC-MET8000 (Oxford)
- Portable XRF X-MET-5000/5100 (Oxford)
- Spectrophotometer OES (Spectro Max)
- UV-Vis Spectrophotometer (Thermo Instrument)
-
Wavelength Dispersive XRF Spectrophotometer
(Rigaku)
- XRD Miniflex (Rigaku)
- XRF Spectrophotometer XSTRATA (Oxford)
Building Material Testing Equipments
- Air Content Apparatus
- Aggregate Impact Tester
- Bitumen Extractor
- Bitumen Penetrometer
- Bitumen Mastic Hardness Tester
- Blain Permeability Apparatus
- California Bearing Ratio (CBR) Test Apparatus
- Compression Testing Machine (CTM) 3000 KN
- Liquid Limit Test Apparatus
- Loss Angles Abrasion Test Apparatus
- RCPT Apparatus (Rapid Chloride Permeability Test)
- Soil Permittivity Apparatus
- Standard Procter Test Apparatus (Heavy and Light)
- Tile Abrasion Resistance Tester
- Vicat Apparatus
- Water Permeability Apparatus
Coal, Fuel and Petroleum Products Testing Equpments
- Atomic Absorption Spectrometer
- Ash Fusion Tester
- Bomb Calorimeter
- Carbon Hydrogen Analyzer
- Diffusible Hydrogen Apparatus
- Flash Point Testing Apparatus
- Hardgrove Grindability Tester
- Karl Fischer Apparatus
- Liquid Laser Particle Counter
- Pour Point/Cloud Point Testing Apparatus
- Rams Bottom Furnace
- Viscometer Bath
Electronics, Electrical and Endurance Testing Equpments
- Ball Pressure Test Apparatus
- Cord Guard Flexing Test Apparatus
- Digital Oscilloscope
- Distortion Meter (Scientific SM5027)
- Ferrite Core Pulse Tester
- Function Generator (Scientific 4060
- Halogen Acid Test Apparatus
- High Voltage Breakdown Tester
- Hot Deformation Test Apparatus
- Impulse Generator
- Leakage Current Meter
- Mechanical Endurance Tester (IS 1293 and IS 3854)
- Million Mega Ohm Meter
- Network Analyzer (Agilent Technologies)
- Noise Generator (Penta-Andro)
-
Oil test System (Standard Resister and Standard
Capacitor)
- Power Analyzer
- Rain Chamber
-
Resistive and Inductive Load,Electrical Endurance
Tester
- Salt Spray Test Chambers (NSS/CASS)
- Stabilized Voltage/Current Suppl
- Temperature Shock Chamber
- Thermal Stability Test Apparatus
- Torque Tester
- Tumbling Barrel
Environment Monitoring and Analysis Testing Equpments
- Air Quality Monitor
- Ambient Air Sampler PM 2.5
- Atomic Absorption Spectrophotometer
- CO/CO2 Gas Analyzer and Digital Meter
- COD Analyzer
- Dew Point Meter
-
Fine Particle Sampler (PM 2.5) with Gaseous
Attachment
- Handheld Particle Counter
- Indoor Monitoring Kitt
- Light Meter
- Ozone Gas Monitor and Controller
- Portable Gas Analyzer
- Respirable Dust Samplers
- Smoke Visibility Machine
- Sound Level Meter
- Stack Sampler
- Steam Trap Management System
- Thermocouple with Stack Kit
- Toxicity Chamber
- VOC Data-logger Meter
- Weather Station Wireless
- Wind Monitor
Mechanical, Metals and Alloys Testing Equpments
- Coating Thickness Tester
- Compression Testing Machine (300 tonnes)
- Etching Machine
- Erichsen Cupping Machine
- Ferrite Meter
- Hardness, Rockwell, Vickers and Brinell (HBW)
- IGC Test Apparatus
- Impact Testing Machine
- Charpy Impact Tester-ASTM
- Metallurgical Microscope
- Micro Hardness Tester (10 to 1000 g)
- Polishing Machine (Dry & Wet)
- Profile Projector
- Servo Hydraulic UTM (50 and 100 tonnes)
- Torsion Testing Machine
- Stress Relaxation Tester
- Surface Roughness Tester
- UTM (1000 KN)
- UTM computerized (50 KN and 100 tonnes)
Non Destructive Testing (NDT) Testing Equpments
- Anchor Bolt Pull Out Tester
- Angle Beam Transducer
- Capo Test Equipment
- Coating Thickness Tester
- Densitometer
- Eddy Current Machine
- Gamma Ray Camera IR 92
- Half cell Potentiometer
- Helium Leak Detector
- Holiday Detectors with accessories
- Magnetization Yoke (Dual)
- Oxide Scale Ultrasonic Thickness Gauge
- PMI XRF Based (Oxrford X-Met TXR)
- PMI OES (Oxford Arc MET 8000)
- Radiography Camera
- Rebar Detection System
- Pile Integrity Tester (Pile Dynamics)
- Stress Relieving Setup with Recorders
- Surface Roughness Tester
- Ultrasonic Flaw Detectors
- Ultrasonic Thickness Tester
-
Ultrasonic Concrete Tester/Ultrasonic Pulse Velocity
Tester
- Wet Film Thickness Gauge
- X-Ray Machine and X-Ray Generator
- XRF (Portable)
Rubber and Plastics Testing Equpments
- Abrasion Tester
- Bump and Shock Machine
- Bursting Strength Machine (Digital)
- Differential Scanning Calorimeter (Mettler)
- Digital Charpy/Izod Impact Tester
- Dynamic Mechanical Analyzer
- Flammability Apparatus
- Gloss Meter (40°/60°/80°)
- Hardness Tester(Shore A and Shore D)
- Hydrostatic Pressure Testing Machine
- IRHD Rubber Hardness Tester
- Ozone Chamber Hampden
- Portable Barcol Hardness Tester
- Resilience Tester
- Shear Fatigue Apparatus
- Surface Abrasion Apparatus
- Tear Tester
- Thermal Conductivity Apparatus
-
UTM Machine computerized
(50 kg, 200 kg, 500 kg and 5000 kg)
- UV Exposure Chambers
- UV Radiation Meter
- Vibration Test Apparatus
- Vicat Softening Temperature Apparatus
Textiles Testing Equipments
- Abrasion Resistance Tester
- Bundesman Water Repellency Tester
- Bursting Strength
- Color Matching Cabinet
- Crease Recovery Tester
- Crocking Meter
- Elmendorf Tear Tester
- Flammability Tester
- Flexometer
- Haze Meter
- Launderometer
- Oxygen Purity Analyzer
- Perspirometer
- Round GSM Cutter
- Shoe Flex Tester
- Shrinkage Scale and Template
- Smoke Index Chamber
- Spectrophotometer (Color)
- Tensiometer
- Transverse Thread Counter
- Toxicity Chamber
- Water Spray Tester
- Xenon Arc Tester (ATLAS)
- Xenon Arc Tester (ATLAS)
Microbiology Testing Equpments
- Autoclave
- Bio Safety Chamber
- BOD Incubators
- CO2 Incubator
- Digital Colony Counters
- Digital Meter with Thermocouple
- DNA Thermal Cycler
- Incubators
- Laminar Air Flow
- Microscope
- PID Controller
- Refrigerators
- Surgical Autoclave
- Vortex Mixture
- Water Bath
List of Equipment with their test Requirement and Applicability as per EN 45545-2
| Sr. No. | Instruments | Tests | Standards | Test Criteria |
|---|---|---|---|---|
| 1 | Cone Calorimeter | Heat Release rate Mass Loss Smoke Production Rate |
ISO 5660-1 | 25 kW/m2 Exposure: R5, R8, R9, R10, R19, R20, R21 50 kW/m2 Exposure: R1, R2, R3, R6, R7, R11, R12, R17 |
| 2 | Lateral Flame Spread Apparatus | Lateral Flame Spread Test | ISO 5658-2 | R1,R2,R3,R4,R7,R11,R12, R17 |
| 3 | Single Flame Source Test Apparatus | Single Flame Detection | EN ISO11925-2 | R4, R5 |
| 4 | Flooring Radiant Panel | Radiant Heat Test | Radiant Heat Test | R8, R10 |
| 5 | Smoke Density Chamber with FTIR | Gas Analysis using FTIR | EN ISO 5659-2 | 25 kW/m2 Exposure with pilot flame: R5, R8, R9, R10, R20, R21, R22 & R23 25 kW/m2 Exposure with pilot flame: R5, R8, R9, R10, R20, R21, R22 & R23 |
| 6 | Toxicity Test Apparatus | Gas Analysis of 7 gases | NFX 70-100-1&2 | |
| 7 | Oxygen Index Test | Oxygen Index Test | EN ISO 4589-2 | R22, R23, R24 |
| 8 | Vertical Flame Test | Vertical Flame Test | EN ISO 60695-11-10 | R26 |
| Sr. No. | Instruments | Product | Tests |
|---|---|---|---|
| 1 | Cone Calorimeter | Interior surfaces Window frames Display screens Limited surfaces Passenger seat (shell coverings) Floor composites Loose upholstery item for seat, Couchettes and beds Upholstery assembly for seat Mattresses |
Heat Release rate Mass Loss Smoke Production Rate |
| 2 | Lateral Flame Spread Apparatus | Interior surfaces Window frames Display screens Limited surfaces |
Lateral Flame Spread Test |
| 3 | Single Flame Source Test Apparatus | Light diffusers, Light coverings | Single Flame Detection |
| 4 | Flooring Radiant Panel | Floor composites | Radiant Heat Test |
| 5 | Smoke Density Chamber with FTIR | Interior surfaces Window frames Display screens Limited surfaces Passenger seat shell (coverings） Floor composites Loose upholstery item for seat， Couchettes and beds Upholstery assembly for seat Mattresses |
Gas Analysis using FTIR |
| 6 | Toxicity Test Apparatus | Interior surfaces Window frames Display screens Limited surfaces Passenger seat shell（coverings） Floor composites Loose upholstery item for seat， Couchettes and beds Upholstery assembly for seat Mattresses |
Gas Analysis of 7 gases |
| 7 | Oxygen Index Test | Interior seals, choke and coils, Supply line system devices PCB Printed circuit boards |
Oxygen Index Test |
| 8 | Vertical Flame Test | Small electro technical products | Vertical Flame Test |